Removing The Spare Tire And Tools - Chevrolet 2004 Blazer Owner's Manual

Removing the Spare Tire and Tools

The jacking equipment you'll need is stored along the
driver's side inner rear quarter panel. In some cases,
you may have to remove the spare tire in order to reach
the jack. Your vehicle is also equipped with work
gloves and a plastic ground mat to assist in the changing
of a flat tire.
The following instructions explain how to remove the
spare tire, depending on where it is mounted on
your vehicle. See Compact Spare Tire on page 5-92 or
Spare Tire on page 5-92 for more information about
the spare.
5-80
A. Retainer
B. Rubber Band
(Some Models)
C. Jack Storage
Cover
D. Wheel Blocks
E. Hub Cap
Removal Tools
(Some Models)
1. To remove your jack cover, pull up on the latch(es)
on the cover (C). Remove the wheel blocks (D),
jack (G) and wheel wrench (F).
F. Wheel Wrench
G. Jack
H. Jacking
Instructions
(Roll and place
instructions above
the jack after it is
installed)