Useful Information; Troubleshooting - Panasonic KX-HN3051C Operating Instructions Manual

Troubleshooting

General use
Problem
The monitor unit does
not work.
The camera unit does
not work.
The monitor unit is
turned off.
Noise is heard, sound
cuts in and out.
The monitor unit or
camera unit does not
sound.
Monitor unit display
Problem
The display is in a
language I cannot read.
is displayed.
The monitor unit display
is blank.
Images are white or
black.
Images are flickering.
For assistance, visit www.panasonic.ca/english/support
HN3051C̲(en̲en)̲0228̲ver.040.pdf 29
Cause & Solution
R Make sure the battery is installed correctly (page 14).
R Fully charge the battery.
R Make sure the AC adaptor is connected to the camera unit and
power outlet (page 12).
R Press M N located on the top of the monitor unit for about 2
seconds.
R You are using the monitor unit or camera unit in an area with
high electrical interference. Re-position the monitor unit and use
the camera unit away from sources of interference.
R The speaker volume is turned off. Adjust the speaker volume
(page 20).
Cause & Solution
R Change the display language setting (page 16).
R The monitor unit is too far from the camera unit. Move the
monitor unit closer to the camera unit.
R The camera unit's AC adaptor is not properly connected.
Reconnect the AC adaptor to the camera unit.
R The camera unit has not been registered to the monitor unit.
Register the camera unit (page 28).
R The monitor unit is in sleep mode. Press any button on the
monitor unit to activate the display.
R The monitor unit is not turned on. Turn it on (page 16).
R The brightness of the display is not correctly adjusted. Adjust the
brightness when images are displayed (page 20).
R Place the camera unit in a different location or position.
R AC (alternating current) lights such as fluorescent lights may
cause flickering in dark environments. (This is not a malfunction.)

Useful Information

29
2018/02/28 16:25:29