Setting Up The Camera Unit - Panasonic KX-HN3051C Operating Instructions Manual

Getting Started
Monitor unit
1
2
Using the stand
l
m

Setting up the camera unit

Information about pan/tilt range
The pan/tilt can be used to adjust the area
viewable from the camera unit by using MFN,
MEN, MDN, or MCN on the monitor unit.
If the area that you wish to view is not visible
even after adjusting the pan/tilt, change the
location or position of the camera unit so that it
can be viewed.
For assistance, visit www.panasonic.ca/english/support
10
HN3051C̲(en̲en)̲0228̲ver.040.pdf 10
A Smart LED indicator
3
4
B Display
5
C M N (Power)
Press to temporarily turn off the
6
display or press for about 2 seconds
to turn on/off the monitor unit
(page 16).
7
D MMENUN
8
E MSMARTN/MOKN
9
Use MSMARTN to access the
shortcut menu.
F Navigator key
MFN, MEN, MDN, or MCN:
– Scroll through various lists and
items
j
– Adjust the pan/tilt range
G M N (Talk)
H Microphone
k
I M
N (Volume/Brightness)
N (Back)
M
J Antenna
K Speaker
L micro-USB connector
M Battery cover
N Stand
n
Pan range
1
Range of visibility: 37°
1
Range of movement: 309°
2
2
2018/02/28 16:25:28