Panasonic KX-HN3051C Operating Instructions Manual page 11

Tilt range
2
1
Range of visibility: 28°
1
Range of movement: 72°
2
Information about sensor features
The camera unit has 3 sensor features: a
visual sensor used for motion detection, a
temperature sensor, and a sound sensor.
Please read the following information about
each sensor before deciding where to install
the camera unit.
Note:
R The camera unit's sensor features are not
designed to be used in situations that
require high reliability. We do not
recommend use of the sensor features in
these situations.
R Panasonic takes no responsibility for any
injury or damage caused by the use of the
camera unit's sensor features.
Using visible light to detect motion
The camera unit can detect motion by
recognizing changes in the brightness of
areas that are visible to the camera unit.
Note:
R The motion sensor does not function during
and for 5 seconds after pan/tilt operations.
R Movement may be incorrectly detected
when the moving object and the
background have similar colours.
R Movement may be incorrectly detected
when there are sudden changes to the
overall brightness level, such as when
lights are turned on.
R Detection becomes difficult when the image
is dark.
R You can also adjust the sensitivity of the
camera unit's motion detection feature and
For assistance, visit www.panasonic.ca/english/support
HN3051C̲(en̲en)̲0228̲ver.040.pdf 11
Getting Started
select which areas of the camera image are
monitored for motion detection.
Temperature sensor
The sensor is triggered when the set
temperature range is exceeded.
Note:
R The temperature sensor may not detect
temperature accurately if the camera unit is
exposed to warm or cool breezes from
heating/cooling systems.
R If a power failure occurs or the power is
disconnected, the temperature will not be
accurate for up to an hour.
R You can adjust the temperature setting of
the temperature sensor (page 20).
Sound sensor
The sensor is triggered when the set sound
level is exceeded.
Note:
R The sound sensor does not function while
the camera unit's lullaby feature is playing a
lullaby.
R The sound sensor does not function during
and for 5 seconds after pan/tilt operations.
R The sound sensor may not function as
desired when the camera unit is placed in
noisy environments.
R You can adjust the sound level setting of
the sound sensor (page 27).
Information about night vision mode
The camera unit features an array of infrared
LEDs that light automatically in low-light
conditions, allowing camera images to be
viewable even when the surrounding area is
dark.
Note:
R When night vision mode is active, camera
images are displayed in black and white.
R If the camera unit is installed in front of a
window and points directly at the window,
images may be poor when night vision
mode is active.
11
2018/02/28 16:25:28