Table of Contents
Advertisement
Notice for use
Product overview
Adjusting the tilt
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be
damaged by rough handling or excessive pressure.
1. Place your monitor with the screen face down on a soft flat surface.
2. Align the stand assembly bracket to the monitor.
3. Insert the bracket towards monitor until it locks in place.
Note: "Remove the screws from base before detaching base and stand from the monitor." on page
2-9".
This section will provide information on adjusting monitor positions, setting user controls, and
using the cable lock slot.
Please see the illustration below for an example of the tilt range.
Chapter 1. 1-2
Advertisement
Table of Contents
