Selecting A Supported Display Mode - Lenovo Q27q-10 User Manual

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation on how to change display modes.
The image size, position and shape might be changed when the display mode changes. This is
normal and the image can be re-adjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-configured the system; preferably to 2560 x 1440 at 75 Hz, which is
a common display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Address ability
640 x 350
720 x 400
640 x 480
800 x 600
1024 x 768
1280 x 1024
1366 x 768
1440 x 900
1600 x 900
1680 x 1050
1920 x 1080
2560 x 1440
480p
576p
720p
1080p
Refresh rate
70 Hz
70 Hz
60 Hz, 72 Hz, 75 Hz
60 Hz, 72 Hz, 75 Hz
60 Hz, 70 Hz, 75 Hz
60 Hz, 70 Hz, 75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz,75 Hz
60 Hz
50 Hz
50 Hz, 60 Hz
50 Hz, 60 Hz
Chapter 2. 2-7