WALL-MOUNTING THE SATELLITE SPEAKERS
To wall-mount the satellite speakers:
1.
Attach the wall mount screw to the back of the
satellite speaker.
2.
Secure the wall mount bracket to the wall. Bracket
screw is not included.
3.
Slide the speaker on to the wall bracket. Ensure
the wall mount screw is secured within the bracket
grooves.
Be sure your screws are attached to wood studs or
drywall anchors (for drywall) or concrete anchors (for
brick/concrete walls).
Wall mounting hardware is not included.
* Do not use any of the included screws for the wall mount installation. These are not intended for mounting.
If you are unfamiliar with power tools or the layout of
electrical wiring in the walls of your home, consult a
professional installer.
Not Included with sound bar
Wall Mount Screw
Screw Size: M4 x 8
*Bracket Screw
Suggested Screw Size:
3.5" diameter.
1.63" minimum length
English - 35