Enable Or Disable Daisy-Chain Topology - NETGEAR Orbi RBR10 User Manual

are not being updated or reached correctly, it might be necessary to increase this
value.
8. Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing
the router and which ports (internal and external) that device opened. The UPnP
Portmap Table also displays what type of port is open and whether that port is still
active for each IP address.
9. To refresh the information in the UPnP Portmap Table, click the Refresh button.

Enable or disable daisy-chain topology

Daisy-chain topology allows your Orbi satellite to connect to other Orbi satellites. This
feature only applies if you own one Orbi router and two or more Orbi satellites. If you
disable this feature, your Orbi satellites can connect only to your Orbi router. This feature
is enabled by default.
Note: Enabling or disabling this feature causes all your Orbi devices to reboot.
To enable or disable daisy-chain:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. To enable or disable daisy-chain topology, do one of the following:
• To enable daisy-chain topology, select the Enable Daisy-Chain Topology check
box.
• To disable daisy-chain topology, clear the Enable Daisy-Chain Topology check
box.
6. Click the Apply button.
Optimize Performance
Orbi Whole Home AC1200 Mesh WiFi System
56 User Manual