Adjusting Your Monitor Image - Lenovo ThinkVision S22e-20 User Manual

Adjusting your monitor image

This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
1
2
3
4
2-3 Flat Panel Monitor User's Guide
Icon Control
Input Source
DDC-CI
Exit
Auto Adjustment
Increase
Brightness
Enable Low Blue
Disable Low Blue
Light
Decrease
Menu
Enter
Description
Switches the video input source
Shift back to previous level when in OSD mode.
Press and hold for 10 seconds to enable or disable the
DDC-CI function
Exit and return to previon level.
Optimizes image (size, position, phase and clock)
(For
analog [VGA] source only)
Press to move to previous item.
Press to Increase current value on adjusment bar.
Direct access to Brightness adjustment.
Press and hold for 3 seconds to enable Low Blue
Light.
Press and hold for 3 seconds to disable Low Blue
Light.
Press to move to next item.
Press to decrease current value on adjusment bar.
To access OSD menu.
Press to confirm selection.
Press and hold for 10 seconds will lock menu/un-lock
menu.
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar.