Tv Front - Hisense 49P4 Quick Setup Manual

TV Front

Item
Remote sensor
Power indicator
STANDBY /
NOTE
Powering on the TV requires several seconds to load program. Do not rapidly turn
the TV off as it may cause the TV to work abnormally.
Description
Receives remote signals from the remote control.
Do not put anything near the sensor, as its function
may be affected.
The light is red in standby mode.
Press the single button when in standby mode, TV
will be turned on.
Press the single button to call up the menu. Then
press the single button to switch between sources
and Power Off, when the focus is on one source or
SOURCE
Power Off, TV will enter the selection after 3 seconds
automatically.
TV Front
STANDBY /
4
Remote sensor
Power indicator
SOURCE