Telephone/Analog > Dial Features - TC Communications TC1920 User Manual

Chapter 4 Management through the Web
4.3.6.4 Telephone/Analog > Dial Features
This page provides configurations for dialing features on the unit.
Hotlink
Hot links are lines that are set to automatically connect to the caller when
the calling line goes "Off-Hook" based on a pre-defined hierarchy. Using the
Hot Links function, you may define up to ten numbers that will have priority
connect hierarchy when making a call.
When the user picks up a phone, it will automatically dial the pre-defined
phone numbers set for the corresponding port shown on this page. A
maximum of ten numbers can be entered, they will all ring simultaneously (if
not busy), and whoever answers first will establish connection.
Up to ten phone numbers can be called simultaneously, and the first to
answer establishes connection and all other lines will be released.
NOTE
Figure 4-26 Telephone/Analog Hot Link
TC1920 Rev 1.3 User Manual
All numbers listed should be FXS only or FXO only to
prevent connection issues.
Screens
4-30