Sony PCV-W700G - VAIO - 512 MB RAM User Manual page 32

Vaio® desktops: vaio® desktop computer
Hide thumbs Also See for PCV-W700G - VAIO - 512 MB RAM:
Table of Contents

Advertisement

Your VAIO
computer is supplied with certain cables. Depending on your in-home cable access, you may require extra
®
cables, adapters or connection equipment not supplied with your computer.
Connecting with a cable or satellite set-top box (STB)
You can connect your Giga Pocket
the set-top box (STB) setup, you can only change channels through the STB, using its controls or supplied remote control.
When using the STB setup:
The Giga Pocket remote control cannot be used to change TV channels. You can use the Giga Pocket remote control
to set Giga Pocket software to the appropriate channel-out number (channel 3, 4, etc.) or to the direct video input
specified by your cable or satellite service provider.
A standard TV remote control cannot be used to change TV channels. You can use your TV remote control to set the
TV to the channel-out number (channel 3, 4, etc.) or direct video input specified by your cable or satellite service
provider.
You may be able to use a universal remote control or commander to change TV channels, if the device is able to
control the STB.
Cable/satellite service, equipment, and features, may vary between service providers. Contact your cable or satellite
service provider for details on using STB equipment and accessories.
Option 1
1.
Connect one end of a TV coaxial cable (optional) to your cable service access. Connect the other end to the In
jack on the back panel of your set-top box (STB).
2.
Connect a second TV coaxial cable (optional) to the Out jack on your STB. Connect the other end to the
single-connection end of a splitter device (optional).
3.
Connect a third TV coaxial cable (supplied) to the double-connection end of the splitter device. Connect the other
end to the VHF/UHF port on the right panel of your computer.
4.
Connect a fourth TV coaxial cable (optional) to the double-connection end of the splitter device. Connect the
other end to the VHF/UHF port on the rear of your TV monitor or display.
To connect in STB m ode (Option 1)
system to cable service access that uses a set-top box (cable or satellite). When using
®
Page 32

Advertisement

Table of Contents
loading

Table of Contents