Connecting The Modem Cable - Sony PCV-W700G - VAIO - 512 MB RAM User Manual

Connecting the Modem Cable

Your computer is equipped with a single modem line jack to connect the supplied modem cable to your telephone wall jack.
To use your wall jack for your telephone and modem lines, purchase a "1-to-2" jack adapter device (splitter).
To connect the modem cable
1.
Unplug your telephone cable from the wall jack.
2.
Insert the telephone cable into one of the RJ-11 jacks on a splitter device (optional).
3. Insert one end of the modem cable (supplied) into the other RJ-11 jack on the splitter device.
4. Insert the plug end of the splitter device into the wall jack.
5. Plug the modem cable into the modem line jack on the computer.
Connecting the m odem cable
Your computer has a protective sticker
10BASE-T and 100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may result in an
electric current overload that can cause a malfunction, excessive heat, or fire in the port. For help on connecting to a
network, see your network administrator.
covering the Ethernet port located on the right panel. Connect only
Page 19