Front Turn Signal Lamps - Chevrolet 2003 Astro Owner's Manual

Front Turn Signal Lamps
1. Remove the two screws at the inside edge
of the
2. Remove the lamp assembiy.
parkinghurn signal lamp assembly.
3.
Squeeze the tab on the
side of the lamp socket
while turning the socket
counterclockwise.
4. Pull the socket out of the lamp assembly.
5. Pull the bulb from the socket.
6. Gently push the new bulb into the socket.
7. Put the socket back into the lamp assembiy and
turn it clockwise until it locks.
8. Put the parkinghurn signal lamp assembly back
into the vehicle and tighten the screws.
5-59