Section Iii • Instructions - iFIT TF 300 User Manual

Section III
• iFIT Above Knee Prosthesis Instructions
COMPLETE A DEVICE INTEGRITY CHECK
PRIOR TO PUTTING ON
Make sure the anti-rotation tape and liner are in place.
PUTTING ON THE SILICONE LOCKING LINER
Check the silicone locking liner and make sure the pin is secured and not
loose. This liner should be rolled onto the residual limb without any gaps
or air bubbles at the end. Make sure the pin sticks out directly below the
limb and that it is not angled in one direction. This liner should be trimmed
above the edge of the socket to protect the skin.
PUTTING ON THE PROSTHESIS
1. Begin in a seated position while wearing a silicone locking liner.
2. Slide the prosthesis onto the residual limb making sure the prosthesis
is in line with the limb. If the prosthesis is put on at an angle the pin will
not go in.
3. Make sure the pin engages in the lock with at least 3 clicks.
8