Quick Start Guide - Baumr-AG BT-689 User Manual

6 Blade Tiller/Cultivator - BT-689

Quick Start Guide

Step 1: Ensure enough petrol/oil mixture is in the tank.
Always use 25:1 ratio (This equates to 40mL of 2 stroke
oil to 1L of petrol).
Please note the air filter needs to be oiled prior to use in
order to trap dust and dirt before it reaches the motor.
Step 2: Press primer bulb 2-3 times (Fuel should flow
through clear tube).
Step 3: Push ON/OFF switch to ON position.
Step 4: Turn choke to "COLD."
Step 5: Pull starter cord 3-4 times or until engine starts.
E&OE
Step 6: Turn choke to "RUN."
Step 7: If engine stalled, pull starter cord again until it
starts.
Step 8: Squeeze throttle according to desired need.
Step 9: When finished, turn ON/OFF switch to OFF.
© 2020 Baumr-AG
Click to Watch:
Starting a 2-Stroke
15