Advertisement
Treatment Frequency Settings
...E.M.S. (Electric Muscle Stimulation)
You do not need to use the E.M.S. setting to get benefits from the
ReBuilder®. It is an additional feature that the ReBuilder® offers
to strengthen muscles that may have atrophied from disuse.
1.
To use for pain or for muscle spasms in shoulders, thighs,
calves and back, use the self-adhesive pads and place over
painful muscles or muscle groups about 4 inches apart, or
more.
2.
Turn on the ReBuilder® with the Intensity knob, then press the
frequency button once until the E.M.S. indicator lights up.
Do not increase the intensity setting until the light next to
the word ReBuilder® lights up. This will take 4-6 seconds.
When the ReBuilder ® light is off, no stimulation is being
sent.
3.
Increase the intensity until you feel a mild pulling in the
muscle. Only use the E.M.S. feature for any one muscle
area for 5 minutes for the first couple of uses. Each week
you can add 5 minutes to the E.M.S. routine for that muscle
area up to a maximum of 15 minutes.
7
Advertisement
