Then, without shutting off the engine, follow
these steps:
3400 (Code E)
V6 Engine
The transaxle fluid dipstick handle is the red
loop near the back of the engine. See "Engine
Compartment Overview" in the Index for more
information on location.
1. Pull out the dipstick and wipe it with a clean rag or
paper towel.
6-24
3800 (Code K)
V6 Engine
2. Push it back in all the way, wait three seconds and
then pull it back out again.
3400 (Code E)
V6 Engine
3. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
-
cross
hatched area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
3800 (Code K)
V6 Engine