Strong GR4 Procedures Manual page 9

WARNING
Failure to follow these instructions may result in wheel loss which can cause injury or death!
Torque wheel nuts to 90-120 lb-ft before first road use. Retorque to 90-120 lb-ft after 10, 25, and 50
miles. Check periodically thereafter.
SAFETY
Cleaning, Repairing, Servicing and Adjusting Prime Movers, Machinery & Equipment
Section 3314 – General Industry Safety Orders
Machinery or equipment capable or movement shall be stopped and the power source de-energized or
disengaged, and, if necessary, the moveable parts shall be mechanically blocked or locked to prevent
inadvertent movement during cleaning, service or adjusting operations unless the machinery or equipment
must be capable of movement during this period in order to perform the specific task. If so, the
EMPLOYER shall minimize the hazard of movement by providing and requiring the use of extension
tools (e.g. extended swabs, brushes, scrapers) or other methods or means to protect employees from injury
due to such movement.
Employees shall be made familiar with the safe use and maintenance of such tools by thorough training.
9