Safety & Awareness Thank you and congratulations on the purchase of your Heat Storm Smart Heater PLEASE READ THIS MANUAL BEFORE OPERATING THIS AP- PLIANCE. IF THE DIRECTIONS IN THIS MANUAL ARE NOT FOL- LOWED, AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
Page 8
• There are two positons from the ceiling are provided by choos- ing the installation hole of the handle • 3 facing angle can be choosen as followings studs for sturdy installation...
Page 9
• Different facing angles are available by choosing the holes to Connect the power 1. Remove the connecting chamber cover by unscrewing 4 screws 2. Put the cable with 10 gauge internal wires into the cham- ber through the hole on the top, the cable, connect L, N and Ground and hold by the cable by a clip inside the chamble.
Need help?
Do you have a question about the HS-6000-GC and is the answer not in the manual?
Questions and answers