Safety & Awareness Thank you and congratulations on the purchase of your Heat Storm Smart Heater PLEASE READ THIS MANUAL BEFORE OPERATING THIS AP- PLIANCE. IF THE DIRECTIONS IN THIS MANUAL ARE NOT FOL- LOWED, AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
Introduction IMPORTANT INSTRUCTIONS When using electrical appliances, basic precaution should always be taken including the following: Read all instructions before using this heater. This heater is hot when in use. To avoid burns, do no let bare skin touch hot surfaces. If provided, use handles when moving this heat- er.
Page 6
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
Installation & Instructions PRECAUTION: • Installation should always be carried out by a qualified electrician or a competent person. • The energy supply must be done through a properly grounded pow- er block • The heaters should always only use the mounting brackets provided. •...
Page 8
1. Assemble the heater onto ceiling use stud finder and ensure to find wood studs for sturdy installation • Two positons from the ceiling are provided by choosing the installation hole of the handle. • 3 facing angle can be choosen as followings...
Page 9
2. Assemble the handle onto wall use stud finder and ensure to find wood studs for sturdy installation • Different facing angles are available by choosing the holes to fix the handle onto the heater body. Connect the power...
Page 10
1. Remove the connecting chamber cover by unscrew 4 screws 2. Put the cable with 10 gauge internal wires into the cham- ber through the hole on the top, the cable, connect L, N and Ground and hold by the cable by a clip inside the chamble.
Page 12
Enjoy your new Heat Storm Wifi Heater! If you have any ques- tions or concerns, feel free to contact us at: 435-752-6611 cs@heatstorm.com...
Page 13
CONNECTING TO WIFI WITH AP MODE If connection fails with regular mode, the wifi light will automatically enter into AP mode and wifi icon will start blinking slowly. You can also enter into AP mode by pressing and holding the “wifi/ sun”...
Page 14
SELECTING CELSIUS AND FAHRENHEIT By pressing the “+” or “-” icons at the same time, you can set the heater to function and display in Celsius or Fahrenheit. NOTE: Switching between Celsius and Fahrenheit can only be per- formed using touchscreen on heater or the Smart Life app on Wi-Fi models and is not available using the remote control.
Page 15
WARNING: • Before cleaning, unplug from the power supply and wait a few min- utes to cool down. • This heater contains no moving parts, it needs very little mainte- nance. However, when the heater builds up heavy dirt, use a soft cloth to wipe it off.
Why? Thermostats vary in their temperature setting. In most cases, the central heating thermostat is not as accurate as your Heat Storm thermostat. • Also, where the temperature sensor is can alter the thermostat reading. • You can calibrate your heaters thermostat to match your central heat- ing thermostat.
Page 17
Installing the heater near objects may cause the air in your room not to circulate and therfore have widely varying temperatures within the same room. • Disconnect the unit from the wall outlet for 2 hours. After 2 hours, plug the unit back into the wall outlet. If the problem persists call customer service at 435–752–6611.
Questions & Answers Why does the Blower Fan keep running after I have turned off the unit? The Blower Fan will continue to run until the heat chamber has cooled down. After a few minutes the fan will shut off automatically. This en- sures that the heating elements are cooled properly hoping to ensure the longevity of your heater.
Page 19
What is Zone Heating? Zone heating implies that there are multiple areas in any given home or business where climate is best controlled by heaters that generate and deliver heat in each area or zone AND regulate temperature in each area or zone with its own thermostat.
Return Policy If you purchased the heater directly from EnergyWise Solutions we will refund the total sales amount when merchandise is received: 1) In new condition 2) Packed in its original manufacturers box and all original packaging material included 3) Original manuals and any accessories that came with the item also included.
1 Year Limited Warranty MODELS: All models and accessories The manufacturer warrants this product to be free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this electric heater in accordance with the instal- lation and operating instructions furnished with the product at all times.
Page 22
7. All other warranties – expressed or implied – with respect to the prod- uct, its components, and accessories, or any obligations/liabilities on the part of the manufacturer are hereby expressly excluded. 8. The manufacturer neither assumes nor authorizes any third-party to assume on its behalf, any other liabilities with respect to the sale of the product.
Page 23
IF WARRANTY SERVICE IS NEEDED Contact the manufacturer by calling the customer service department at 435–752-6611. Make sure you have your sales receipt, the location of purchase, and the model of your product. When you contact customer service, they will attempt to troubleshoot the problem with you over the phone.
Page 24
HEAT STORM WE APPRECIATE YOUR FEEDBACK! PLEASE LEAVE US A REVIEW! at heatstorm.com HEAT STORM...
Page 28
NEED HELP? call us: mail us: 435-752-6611 cs@he atstorm.com Visit us at: heatstorm.com for more product information...
Need help?
Do you have a question about the HS-6000-GC and is the answer not in the manual?
Questions and answers