Weidmüller 1037 Operating Instructions Manual page 15

Test frequency:
Test voltage:
Overload protection: 500 Vdc or AC rms
CONTINUITY
Audible indication:
Green LED
Response time:
Overload protection: 500 Vdc or AC rms
DIODE TEST
Test current:
Accuracy:
Open circuit volts:
Overload protection: 500 Vdc or AC rms
(NCV) NON-CONTACT VOLTAGE INDICATOR
Detect voltage from 24V to 600 Vac 50Hz ~ 60Hz
(HI-V) Hl VOLTAGE WARNING
Vac/Vdc > 30V, the beeper will beep and the red "Hi-V" LED
will blink
CLEAN POWER INDICATOR
Green LED is on, if THD is below trigger point, off if above
Trigger point is 5% ± 2%
Sensitivity:
SHAKER
Turns on:
Display:
Polarity:
Overrange:
Zero:
34Hz
< 3.5V
> 100Ω
is on continuously
100 ms
1.0 mA (approximate)
± (1.5% rdg + 3 dgts)
3.0 Vdc typical
> 20 Vac on 200 Vac range
> 200 Vac on 750 Vac range
> 30 Vac on 200 Vac, 750 Vac ranges
variable shake so user can differenti-
ate 60V, 120V, 240V, 480V
3.5 digit liquid crystal display (LCD)
with a maximum reading of 1999
Automatic, positive implied, negative
polarity indication
(OL) or (-OL) is displayed
Automatic
15