Panasonic WV-CW634 Installation Manual page 28

2
Remove the enclosure and inner
dome from the main body by loos-
ening the three fixing screws.
Loosen the three fixing screws by using
the provided bit for tamperproof screw.
Detach the inner dome while pushing the
parts with the "PUSH" indication.
Important:
• Do not hold the inner dome when carrying
the camera. Otherwise, the camera part
may fall and it may damage the camera.
Note:
• Perform the same procedure when
replacing with the optional dome cover
WV-CW4SA.
3
Secure the camera to the bracket
with the camera fixing screw (red, 1
position).
Important:
• The camera fixing screw shall be securely
tightened. Otherwise, water exposure may
cause damage or malfunction of camera,
or camera dropping may result in injury.
(Recommended tightening torque: 0.78 N·m)
4
Remove the screw (blue, 1 position)
for transport protection with a Phillips
screw driver.
28
Press the parts with the
"PUSH" indication.
Camera xing screw (red)
Screw for transport protection (blue)
* The camera xing screw
shall be securely tightened.