Charging • Fully dry off the USB port before charging. • damage. • Do not power on your headphone while charging. Flashing red once every 60 seconds Low battery Steady red Being charged Light off Fully charged Powering On/Off Press and hold the power button for 3 seconds to power on/off. 01 EN...
Bluetooth Pairing 1. When powered off, press and hold the power button for 5 seconds until the LED 2. Select “Soundcore Life Q30” on your device’s Bluetooth list to connect. Life Q30 Flashing blue Bluetooth pairing Steady blue Bluetooth connected Pairing with another device pair up with another device.
Life Q30 • Your Soundcore headphone can only play music on one mobile device at a time. • Each time you power on your Soundcore headphone, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
Page 5
Answer/End a call Press Put the current call on hold and answer a new incoming call Reject a call Press and hold for 1 second Switch between held call and active call Activate Siri or other voice assistant software Press and hold for 1 second NFC Mode headphone easily.
Noise Cancellation Mode To reduce ambient noise, turn on the active noise cancellation mode by pressing the NC ON Transparency Mode To stay aware of your surroundings by allowing ambient sounds in, touch the right panel for 1 second to activate the transparency mode. AUX Mode Play audio on an external device by plugging in a 3.5mm AUX cable.
Page 7
Soundcore App Download the Soundcore App for an enhanced experience with your headphones. EQ settings: There are more than 20 EQ settings you can choose from in the App to optimize your experience while enjoying different music genres.
Reset You might need to reset your headphone if you experience any connectivity problems or function issues. Press and hold the power button and volume up button simultaneously for 5 Specifications Input 0.65 A 2 hours 40 hours 60 hours Driver size 40 mm ×...
Need help?
Do you have a question about the Life Q30 and is the answer not in the manual?
Questions and answers