Trust 100S Manual
  1. Manuals
  2. Brands
  3. Trust Manuals
  4. Security Camera
  5. 100S
  6. Manual

Trust 100S Manual

Wireless security camera system
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

TRUST WIRELESS SECURITY CAMERA SYSTEM 100S
1
Introduction
This instruction manual is for users of the 'TRUST WIRELESS SECURITY CAMERA
SYSTEM 100S '. The WIRELESS SECURITY CAMERA SYSTEM 100S is to be used
to protect your property. This device works using radio frequencies and, therefore,
does not require any cables.
Advantages:
•
Without wires, passes on video and audio received by the camera
•
The 2.4 GHz FM signal passes through walls, floors and ceilings.
•
Can be extended with the Trust 100 series security cameras
2
Safety
Before use, read the following instruction with care:
1.
Do not use this device in damp environments, such as a bathroom, damp
basement, swimming pool, etc.
2.
Never insert objects in the slots on the outside of the device, because you
could touch parts which are live. This may cause fire or electrical shocks.
3.
Do not try to repair this device yourself. If you open a housing or remove it,
you could accidentally touch parts which are live. You also run other risks.
4.
Position the device so that the cables cannot be damaged.
5.
This device has been approved according to the European R&TTE
guidelines. The device works using a 2.4GHz sender/receiver. If in doubt,
check whether the use of this device is permitted in your country.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 100S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Trust 100S

Summary of Contents for Trust 100S

  • Page 1 Introduction This instruction manual is for users of the ‘TRUST WIRELESS SECURITY CAMERA SYSTEM 100S ‘. The WIRELESS SECURITY CAMERA SYSTEM 100S is to be used to protect your property. This device works using radio frequencies and, therefore, does not require any cables.
  • Page 2 TRUST WIRELESS SECURITY CAMERA SYSTEM 100S Connecting Attention: In France, the law only permits the use of channel 3. Components The connections and switches of the receiver are specified in table 1 and figure 1. Item: Description: Purpose: Channel selection switches Select the channel with this.

  • Page 3: Setting The Channels

    TRUST WIRELESS SECURITY CAMERA SYSTEM 100S Insert the batteries into the battery compartment as shown in figure 4. You can also see how the batteries must be installed on the inside of the camera. Close the battery flap. Note: Inserting the batteries incorrectly will cause damage.

  • Page 4: Directing The Camera

    TRUST WIRELESS SECURITY CAMERA SYSTEM 100S Directing the camera The camera lens can be turned 90 degrees up and down. On the stand, the camera can be adjusted 30 degrees up and down and 200 degrees to the left and the right.

  • Page 5: Technical Information

    Extension into a wireless audio / video system If you have several black / white or colour cameras and/or receivers from the Trust 100 series wireless devices available, you can extend your system without wires. The condition for this to function well is that the additional cameras and/or receivers to be connected operate on the same frequency (signal).

  • Page 6: Troubleshooting

    Register your product via www.trust.com, entitling you to optimum warranty and service support such as up-to-date FAQ. In addition, you will automatically be informed of the development of your and other Trust products. And you have a chance to win spectacular prizes.
  • Page 7 TRUST WIRELESS SECURITY CAMERA SYSTEM 100S If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centres. You can find more information at the back of this instruction manual. Please have the following information available: •...

Table of Contents