Trust 100B Manual

Wireless security camera

TRUST WIRELESS SECURITY CAMERA 100B

Introduction

This instruction manual is for users of the 'TRUST WIRELESS SECURITY CAMERA

100B'. The camera makes is possible to expand your existing 2.4 GHz system without

wires. The TRUST WIRELESS SECURITY CAMERA 100B is to be used to protect

your property. This camera operates without wires via radio frequency. This CAMERA

can also be used in the dark. The camera can be connected to receivers of the Trust

100 series wireless products. The camera can also be used with other 2.4 GHz

wireless systems provided that they operate with the same technology; we cannot

guarantee the operation of this combination.

Before use, read the following instruction with care:

Do not use this device in damp environments, such as a bathroom, damp

basement, swimming pool, etc.

Never insert objects in the slots on the outside of the device, because you

could touch parts which are live. This may cause fire or electrical shocks.

Do not try to repair this device yourself. If you open a housing or remove it,

you could accidentally touch parts which are live. You also run other risks.

Position the device so that the cables cannot be damaged.

This device has been approved according to the European R&TTE

guidelines. The device works using a 2.4GHz sender/receiver. If in doubt,

check whether the use of this device is permitted in your country.

Attention:

In France, the law only permits the use of channel 3.

3.1

Connecting the adapter

By using the adapter supplied with it, you can connect the camera to the electricity

supply. Insert the plug of the power adapter into the DC 'D' as in figure 3. Plug the

power adapter into the electrical outlet.

Table of Contents

Do you have a question about the 100B and is the answer not in the manual?

Page 1 This camera operates without wires via radio frequency. This CAMERA can also be used in the dark. The camera can be connected to receivers of the Trust 100 series wireless products. The camera can also be used with other 2.4 GHz wireless systems provided that they operate with the same technology;...
Page 2 TRUST WIRELESS SECURITY CAMERA 100B Placing batteries (optional) Remove the battery flap on the bottom left-hand side of the camera as indicated in figure 1. Insert the batteries into the battery compartment as shown in figure 2. You can also see how the batteries must be installed on the inside of the camera.
Page 3 TRUST WIRELESS SECURITY CAMERA 100B Technical information Description: Response: Image [COLOUR / BLACK & WHITE] BLACK & WHITE CMOS Optic module [CCD / CMOS / ...] Lens [Inch] 1/4" Microphone integrated [y / n] Adapter 9V / 300 mA RF approval no. (CE xxxx !) CE0123! Wireless technology [RF, IR, ...
Page 4 Trust products. And you have a chance to win spectacular prizes. If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centres. You can find more information at the back of this instruction manual.