Repair; Notes On Service Part Replacement; Adjustment / Settings; Verification Items - Canon MP610 Service Manual

MP610

3. REPAIR

3-1. Notes on Service Part Replacement (and Disassembling / Reassembling)
Service part
Logic board ass'y
Absorber kit
Carriage unit
Paper feed motor
Platen unit
PR lift shaft ass'y
Input carriage lift gear
Notes on replacement
- Before removal of the logic
board ass'y, remove the power
cord, and allow for approx. 1
minute (for discharge of
capacitor's accumulated
charges), to prevent damages to
the logic board ass'y.
- Before replacement, check the
ink absorber counter value (by
service test print or EEPROM
information print).
[See

3-4. Verification Items, (1)

Service test print for details.]
- The red screws securing the
paper feed motor are allowed to
be loosened only for paper feed
motor replacement. (DO NOT
loosen them in any other cases.)
*1

Adjustment / settings

After replacement:
1. Initialize the EEPROM.
2. Set the ink absorber counter
value.
3. Set the destination in the
EEPROM.
4. Correct the CD / DVD and
automatic print head
alignment sensors.
5. Check the ink system
function.
6. Perform LF / Eject correction.
7. Perform button and LCD test.
[See 3-3. Adjustment /
Settings, (6) Service
for details of 1 to 7.]
8. Perform print head alignment
and LCD language setting in
the user mode.
After replacement:
1. Reset the ink absorber
counter.
[See 3-3. Adjustment /
Settings, (6) Service
for details.]
At replacement:
1. Apply grease to the sliding
portions.[See 3-3.
Adjustment / Settings, (3)
Grease application.]
2. Check the ink system
function.
[See 3-3. Adjustment /
Settings, (6) Service
for details.]
3. Perform print head alignment
in the user mode.
At replacement:
1. Adjust the paper feed motor.
[See 3-3. Adjustment /
Settings, (1) Paper feed motor
adjustment, for details.]
After replacement:
1. Check the ink system
function.
2. Perform LF / Eject
correction.
[See 3-3. Adjustment /
Settings, (6) Service
for details.]
At replacement:
1. Apply grease to the sliding
portions.
12 / 43
TABLE OF CONTENTS
Operation check
- EEPROM information print
- Service test print
- Printing via USB connection
- Copying
- Direct printing from a digital
camera (PictBridge)
mode,
- Ink absorber counter volume
print
(After the ink absorber counter
is reset, the counter value is
mode, printed automatically. )
- Service test print (Confirm
CD / DVD and automatic
print head alignment sensor
correction, and ink system
function.)
mode,
- Service test print
mode,
- Service test print