Front Turn Signal Lamps - Chevrolet 1997 Astro Owner's Manual

6. Remove the
composite assembly.
7. Turn the halogen bulb counterclockwise to remove
8. Install the new bulb into the composite assembly by
turning
it
clockwise until it is completely tightened.
tightening all of the screws previously removed.
from the assembly.
9. Replace the composite assembly by installing and
Front Turn Signal Lamps
1. Remove the two screws at the inside edge of the
parking/turn signal lamp assembly.
2. Remove the
lamp assembly.
3. Squeeze the tab on the
side of the lamp socket
while turning the socket
counterclockwise.
4. Pull the socket out of the lamp assembly.
5. Pull the bulb from the socket.
6. Gently push the new bulb into the socket.
7. Put the socket back into the lamp assembly and turn
it clockwise until it locks.
8. Put the parkinghrn signal lamp assembly back into
the vehicle and tighten the screws.
6-40