Spring MAX INDUCTION SM-351C-FT Owner's Manual page 4

Maintenance
To clean the induction range, first ensure the unit has been turned off,
unplugged from the power source and has cooled before handling.
Wipe down the unit with a sponge or cloth with a mild dishwashing
liquid. Dry with a clean, soft cloth. Do not immerse the induction
range directly in water for cleaning – this will damage the unit.
Inspect the mesh air filter on the underside of the induction range each
day. If it is soiled, remove the filter and wash with hot water, dish
washing detergent and a scrub brush. Dry and attached to the unit
before operating. If using the unit daily, recommend filter replacement
period is every 6 months.
Troubleshooting/Error Codes
Error Cause
E0 The induction range does
not sense an induction-
ready vessel on the surface.
E1 The range has overheated
due to blocked ventilation
and has shut down.
E2 Overheating protection has
been activated and the
range has shut down.
E3 The range is experiencing
temporary voltage
overload.
Keep the induction range away from other ovens or stoves. If the
surrounding temperature is hot, the induction range may stop heating.
Solution
Place an induction ready vessel
on the range.
Clear vents, let the range cool
and restart the range.
Remove vessel from the range,
let the range cool and restart the
range.
Remove vessel from the range,
let the range cool and restart the
range. Review dedicated power
requirements under Installation
in this manual.
6
Service & Repair
Never attempt to service any part of The Sizzle Induction Range.
Attempting to service the unit on your own, or through an unauthorized
repair facility, automatically voids your warranty. Contact our Service
Department at 630-527-8600. For service forms, visit the Spring USA
website.
Warranty
For limited warranty information, visit the Spring USA website.
7