Steren RN-KID Instruction Manual page 34

4. Press the on/off button pointing towards the
device to be programmed, the LED will fl ash
indicating it's in search mode.
0
TV CBL
5. When the code is found, the TV or decoder
turns off, press mute to confi rm and fi nish
programming
1
-
For faster searching, you can press the on/off button until the device to be programmed turns
off, while the control is in search mode code, i.e., after step 4, when the LED is blinking.
- In case you don't press "Mute" in time, repeat steps 1-4 and press "CH-" while the LED fl ashes.
This will give you the opportunity to return to the code and prevent a repeating the search, the devi-
ce you want to program will shut down and then you may press the mute button promptly.
11