Steren RN-KID Instruction Manual page 30

PROGRAMMING
You can program both your TV and your decoder to control the
two without using different controls. Program your TV fi rst and
then repeat the process with your decoder. Some providers
do not use decoder, then you will only need to program it with
your television.
Once both are programmed, if you want to use the control
functions of television you must press the "TV" device button
and then the button for the function you want to perform. For
example, if you want to raise the volume on the TV, press the
"TV" button and then turn up the volume.
To use the control with the decoder press the "CBL" button.
There are two ways to program the control: manual and
automatic.
0
TV CBL
1
0
TV CBL
1
7