Steren RN-KID Instruction Manual page 32

5. Enter the four digit code you choose from the
list. (If the code is wrong, the LED will fl ash 3 times
and the control will exit the setting mode; you will
have to repeat steps from 2).
6. Press the mute button to save and complete
programming. The LED will turn off indicating that
the programming is fi nished.
Remember you must direct the control towards the
device you want to program.
7. Test the remote; if it does not works and there
are more code options for your TV brand in the list
try with a different one. Repeat steps 2-6.
8. Write down the 4 digit code for future reference.
-
If you do not enter a code in 30 seconds, the LED will light off and the control will exit the
setting mode.
- The mute button works to enter the number 0.
9