Table of Contents
Advertisement
Put the hooked end of the wheel wrench into the slot in
the tray (A). Lift the tray using the wheel wrench (B)
and insert the latch bolt into the notch in the tray (C). To
raise the tray, use the socket end of the wheel wrench to
turn the latch bolt counterclockwise. Turn the latch bolt
until it is snug.
Put the wheel wrench back in its place under the driver's
seat. Be sure to tighten the wingnuts.
Put the jack, wheel nut socket and wheel lock key in
the rear storage compartment behind the passenger's
seat. Make sure the parts are stored properly in the
foam container. Position the jack in the container so
that you can read the yellow CAUTION label from
the driver's seat. Replace the plastic tray and close the
storage compartment.
I
NOTICE:
I
Your Corvette's radio receiver box is in the rear
storage compartment. To help avoid damage,
carefully place the jack, socket and wheel lock
key into the foam container in the compartment.
Do not toss or 'place the items against the radio
receiver box or any wiring.
5-35
Advertisement
Table of Contents
