CENTER HIGH-MOUNTED
STOPLIGHT BULB
REPLACEMENT
EMSA7030
1. Remove the cover and turn the bulb
socket counterclockwise and remove
it from the housing.
2. push the bulb in, then rotate it one-
quater turn counterclockwise and
remove the bulb from the socket.
3. Insert a new bulb in the socket, then
push the bulb in and rotate it one-
quarter turn counterclockwise and
remove the bulb from the socket.
7-36
MAINTENANCE
4. Re-install the bulb socket into the
rear combination light assembly and
rotate it one-quarter turn clockwise to
lock the socket in place.
5. Re-install the cover.
TRUNK ROOM LIGHT BULB
REPLACEMENT
(IF EQUIPPED)
EMSA7031
1. Remove the trunk room lamp cover
using flat blade screw driver.
2. After replacement of bulb, install the
cover.