Sony PCV-RX750 System Reference Manual page 45

8
If necessary, remove any add-in cards (see
Battery" on page 30) to gain access to the battery. You may also need
to disconnect some cables.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
9
Use a small flathead screwdriver or your finger to push in (not down)
against the small tab at one end of the battery holder to pop out the
battery.
Push in (not down) to
10
Gently lift out the battery and dispose of it according to the
instructions that came with the new battery.
11
Insert the new battery into the battery holder, with the plus (+) side
up, and press down until the battery is secure.
✍
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
12
Replace any add-in cards that were removed.
13
Reconnect any cables that were disconnected.
14
Replace the side panel (see
15
Reconnect the power cord and turn on the computer.
Upgrading and Maintaining Components
pop out battery
"Replacing the Side Panel"
"Replacing the Lithium
on page 25).
31