Product Description And Intended Use; Safety Instructions - FIAM. MIR Product Information

MIR Mirror
EN
Art. 880
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.

Product description and intended use

1
• Product description and composition
The MIR Mirror - Art. Code 880 is a Mirror of a great esteem, conceived for home furniture, manufactured in float glass and
shaped at high temperature. This process makes the possible imperfections not a defect but an own feature of the handmade
work and of the unicity of the piece. The MIR Mirror was produced at the FIAM ITALIA SPA factory at Via Ancona 1/B, 61010
Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it
• Intended use
The article known as MIR is designed and built to serve as a Mirror for indoor use and must therefore be used only for this purpose
and no other. For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

Safety instructions

2
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
• Transporting and storing the MIR Mirror in the original packaging
The MIR Mirror, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking. It must be
stored indoors in a dry place.
Place the MIR Mirror in the original packaging, in the horizontal position. The arrows on the label on the packaging must be vertical
and pointing upward.
Never place weights or loads in excess of 40 Kg on the original packaging, since exceeding this weight may cause the breakage
of the article.
The MIR Mirror in the original packaging weighs about 80 kg. It must therefore be placed on surfaces capable of supporting its
weight.
• Removing the packaging - assembly
To remove the original packaging of the MIR Mirror, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may
damage the MIR Mirror.
c) Remove the MIR Mirror from its packaging. At least two people are required for this operation. Wear gloves which assure
a good grip on the float glass.