74
VAIO Digital Studio System Reference Manual
I/O and Expansion Slots
Serial ports
Parallel port
Modem ports
USB ports
PCI slots
AGP slot
IDE headers
i.LINK® (IEEE 1394)
ports
Floppy Disk Drive and Controller
Drive
Floppy disk controller
Floppy disk drive
Hard Drives and Controller
Drive
EIDE controller
*
IDE hard drive
*
Bus-mastering EIDE driver installed.
** The Specifications sheet is supplied with your computer's original documentation.
One high-speed NS16C550-compatible port
One high-speed bi-directional Centronics-
compatible port with ECP and EPP modes
Two RJ-11 connectors (for line and phone)
USB1 and USB2 (on front panel)
USB3 and USB4 (on rear panel)
Two available slots. Not all PCI slots are available
for expansion. (See Specifications sheet for
**
details.)
One available slot. Maximum length for add-in
cards is 9.05 inches
Primary and secondary
(each supports two ATA-100 IDE drives)
One 4-pin port on front panel
One 6-pin port on rear panel
Description
82077-compatible (supports up to 2.88 MB)
3.5-inch, 1.44 MB
Description
Supports up to four EIDE drives (supports PIO Mode 4
EIDE drives and Ultra DMA/100 Mode drives)
See Specifications sheet for details.
**