Using The Vehicle Dock From The Universal Xpress Car Kit - XM Satellite Radio Onyx XDNX1V1KC User Manual

Configuring Your onyX

Using the Vehicle Dock From the Universal Xpress Car Kit

If you have chosen to use the Vehicle Dock from the
Universal Xpress Car Kit rather than the PowerConnect
Vehicle Dock included with your onyX radio, you will need to
complete some additional installation steps . When you have
completed these additional steps, you can continue with the
installation of your onyX .
When you are using the Universal Xpress Vehicle Dock,
the screen will initially display "AUX Connected" when you
power on your onyX . Ignore this message . Once you have
completed the steps below, it will not be displayed again .
If you are connecting the audio using PowerConnect (or
FMDA):
1 Disable the AUX Detect feature . Refer to "AUX Detect" on page 91, and
disable AUX Detect .
2 Turn the FM Transmitter in the onyX On . Refer to "Turn FM Transmitter
On/Off" on page 98, and turn the FM Transmitter On .
3 Continue with the installation .
If you are connecting the audio using the Aux In Cable or Cassette Adapter:
1 Disable the AUX Detect feature . Refer to "AUX Detect" on page 91 , and
disable AUX Detect .
96
AUX Connected
Audio enabled through
auxiliary line. FM turned OFF.
TIP! The FM Transmitter must be Off . To verify that the FM Transmitter is
Off, refer to "Turn FM Transmitter On/Off" on page 98 .
2 Continue with the installation .
97