Table of Contents
Advertisement
Configuring Your onyX
Demo Mode
Your onyX has a demo mode that starts playing when, for a prolonged period of
time (more than 5 minutes), the radio either detects it's not connected to the
antenna, or the antenna stops receiving a signal . It disappears when the antenna
is connected properly or when the radio starts receiving a signal . You can also exit
demo mode at any time, by pressing and holding the Select button for 10 seconds .
If desired, you can also manually put the onyX in demo mode .
The ability for onyX to enter demo mode is enabled by default . If you don't want
onyX to ever enter the demo mode, you can disable the demo feature . You can
enable it again at another time if desired .
To enable or disable the demo mode:
1
Press menu .
2
Press
to scroll to and highlight
Demo Mode and press the Select
button .
3
Status will be highlighted . Press
the Select button to toggle the
setting between enabled or disabled .
(Repeatedly pressing the Select
button toggles between the choices .)
4
If you have selected disabled, press and hold menu to return to the
main display screen . If you have selected enabled continue with step 5 .
94
Demo Mode
Status
enabled
Enter Demo Mode
5
Press
to scroll to and highlight Enter Demo Mode and press the
Select button . The demo mode will start in 10 seconds .
6
To exit demo mode at any time, press and hold the Select button
for 10 seconds .
Demo Mode
Entering Demo Mode.
Press & Hold Select
for 10 seconds to exit
95
Advertisement
Table of Contents
