3.
Slide the charger into the battery pack until it is
fully seated
(Figure
4.
To remove the charger, slide the charger
backward out of the battery.
5.
Refer to the following table to interpret the LED
indicator light on the battery charger.
Indicator
Indicates
light
Off
No battery pack inserted
Green
Battery pack is charging
blinking
Battery pack is charged
Green
Red
Battery pack and/or battery charger is over or under
the appropriate temperature range
Red
Battery pack charging fault*
blinking
*Refer to
Troubleshooting (page 11)
information.
Important:
The battery can be left on the charger
for short periods between uses.
If the battery will not be used for longer periods,
remove the battery from the charger; refer to
Storage (page
10).
8).
for more
9
Need help?
Do you have a question about the Flex-Force Power System MAX and is the answer not in the manual?