Summary Of Changes - Nokia Flexi Multiradio BTS Technical-Operating Documentation

Summary of changes
6

Summary of changes

Changes between document issues are cumulative. Therefore, the latest document
issue contains all changes made to previous issues.
Changes between issues 04 (2014-01-17) and 05 (2014-05-30)
RF Module and RRH Module LED indications
LED indications (stable red and blinking red) have been updated.
•
RF Module power requirements and output power
Basic conditions for output power measurement have been updated
•
Power consumption values of the following modules have been updated: FRPA/B,
•
FRMC, FXCB, FRIE, FRHC, FRHF, FXEB, FXDB, FXFC.
Information on FXDJ has been merged with FXDA in Table 14: RF Module power
•
consumption.
RRH front panel description
Table 9: RRH antenna line device support has been added.
•
RRH Module power requirements
Power consumption values of the following modules have been updated: FHDA,
•
FHDB, FHEA, FHEB, FRIG, FRHD, FRHE.
Overview of Flexi Multiradio BTS RF Module
FRIE is a 3x60 W RF Module. Table 1: RF Module naming convention has been
•
corrected.
RF Module front panel description
Table 7: RF Module antenna line device support has been added.
•
Information on RET interface (8-pin circular) has been corrected for the following RF
•
Modules: FRMC,FRHC, FRHF, FRPA.
Changes between issues 03 (2013-12-13) and 04 (2014-01-17)
Editorial changes have been made.
•
Changes between issues 02 (2013-11-28) and 03 (2013-12-13)
Power requirements section has been updated.
•
Appendix C: Avoiding Passive Intermodulation during RF Module and RRH operation
•
has been added
Reference to the Flexi Multiradio BTS RF Sharing Released Configurations;
•
DN09123381; Issue 11; GSM EDGE BSS Rel. RG20(BSS), RG30(BSS); WCDMA
RAN Rel. RU30, RU40; LTE RAN Rel. RL30, RL40, RL50 Operating Documentation
has been added
Flexi Multiradio BTS Radio Module and Remote Radio
DN0951745
Head Description
Issue: 05