Nokia Flexi Multiradio BTS Technical-Operating Documentation page 43

Flexi Multiradio BTS Radio Module and Remote Radio
Head Description
Issue: 05
Table 10 DC Cable Requirements for 80 W RF Modules
Variant Total Configured
output power
2100/1900/18 <= 180 W
00
(FRGT/FXFC/
FXEB)
2100/1900/18 > 180 W
00
(FRGT/FXFC/
FXEB)
2100/1900/18 > 180 W
00
(FRGT/FXFC/
FXEB)
2100/1900/18 > 180 W
00
(FRGT/FXFC/
FXEB)
2100/1900/18 > 180 W
00
(FRGT/FXFC/
FXEB)
850/900 <= 180 W
(FXCB/FXDB)
850/900 > 180 W
(FXCB/FXDB)
850/900 > 180 W
(FXCB/FXDB)
850/900 > 180 W
(FXCB/FXDB)
850/900 > 180 W
8) Total configured output power is the total power for all three branches. For example, a 2+2+2 @ 40 W is
equal to 240 W.
9) The following power cables are available: FPCA 472806A (Dual, 2 m, 6.6 ft), FPCB 472817A (Single, 2 m,
6.6 ft), FPCC 472823A (Single, 2 m, 6.6 ft), FPTA 472246A (Single, 4 m, 13.1 ft). The dual power cable
requires two available PWR outputs on the System Module or PDU (excluding PWR AUX). It is
recommended to use the next available connectors in sequence. The FPCC and FPTA require removing
the connector from one end. Consider future expansion when choosing single or dual power cables.
RET/MHA
8)
Any
Yes
Yes
No
No
Any
Yes
Yes
Yes
No
DN0951745
Power requirements and output power
Minimum DC Power
voltage 9)
Cable
Any Single
< 46.5 Dual
>= 46.5 Single
< 41.5 Dual
>= 41.5 Single
Any Single
< 40 Dual
< 46.5 Single
>= 46.5 Single
< 41.5 Single
43