Rack Packaging; Mechanical Specifications - SBG Navsight Ekinox IMU Hardware Manual

Navsight Solution – Hardware Manual

2.3.2. Rack packaging

The rack version of Navsight processing unit is well suited for integration into a standard 19" rack setup. In
addition, the use of standard connectors such as RJ-45 and DB-9 enable fast integration.
Located on the front panel, a membrane keyboard and LED indicators inform user about system health.
On the back face, all connectors are integrated. Check out section Processing unit Interfaces specifications
for more details about processing unit connectors and interfaces.
Figure 2.10: Rack processing unit front face

2.3.2.1. Mechanical specifications

The table below summarizes all mechanical and environmental specifications.
Electrical and Mechanical Specifications
Enclosure materials
Dimensions
Weight
Input power voltage
Power consumption
Environmental specifications
Operating Temperature range
Storage Temperature range
Operating Vibrations
Figure 2.11: Rack processing unit back face
Aluminum (painted)
42.2 x 20.4 x 4.4 cm (standard 1U 19" rack)
1.95kg
12 – 36V DC – isolated power supply
External international AC/DC converter
E: 7.5W
S/T: 9.5W
-40 to 71°C
-40 to 85°C
6g RMS – 20Hz to 2 kHz as per MIL-STD-810G
19/74
NAVSIGHTHM.1.3