Advertisement
2.
CONTENT & USE
2.1.
Content
2.1.1. Check the content against the following list and contact your supplier if any items are missing or
damaged.
• Handle with retaining screw • Back-up washer • 13 Plastic Adaptors • 3 Hooded Plastic Adaptors
2.1.2. Adaptor diameters - 33, 38, 41, 43, 49, 52, 54, 61.5, 65, 69.5, 76, 82, 85mm
Hooded Adaptor diameters - 62, 69.5, 88.5mm
2.2.
Use
2.2.1. Remove screw (fig.4.A) from handle (fig.4.B). Place the steel back-up washer (fig.4.C) on the handle.
2.2.2. Select the adaptor (fig.4.D) which is slightly smaller than outside diameter of seal and place it on the
handle.
2.2.3. Select a second adaptor (fig.4.E) which is slightly larger than inside diameter of seal and place it on
handle.
2.2.4. Clamp all parts on the handle with the screw (fig.4.A).
2.2.5. Press the seal over the second adaptor (fig.4.E) and then tap into place in the housing (fig.5.F).
ALWAYS WEAR SAFETY GOGGLES AND GLOVES WHEN USING SEAL DRIVERS
Users of seal drivers are reminded that damage to the striking faces can take place and we
recommend that safety goggles and gloves are worn when using this tool.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and
component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our
latest catalogue and promotions, call us on 01284 757525 and leave your full name and address, including postcode.
fig.4
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 757500
Web
01284 703534
email
VS704.V2
www.sealey.co.uk
sales@sealey.co.uk
Issue: 1 - 17/07/08
Advertisement
