NextCentury RR4-TR Operation And Installation Manual

Remote reader

Advertisement

Quick Links

RR4-TR Remote Reader
With Integrated NextCentury Transceiver (Radio)
Operation and Installation Guide

1| Product Overview

The NextCentury RR4-TR Remote Reader is an advanced meter
reading solution which provides a high visibility remote display of
one or two utility meters. The Remote Reader is an NTEP
certified remote display for water, electric, and gas applications.
The Remote Reader has an attractive consumer design, making it
an ideal solution for apartment and remote metering. The utility
and unit of measure are clearly displayed, ensuring an accurate
interpretation of the read.
In addition to displaying the meter read, the RR4-TR Remote
Reader operates as a wireless transceiver end-point to transmit
meter read data to the NextCentury cloud platform.
The Remote Reader utilizes Dual Meter+™ technology, making
this single model compatible with virtually all modern encoded
and pulse-output utility meters, including water, electric, gas,
run-time, and thermal meter models.

2| Technical Specifications

2.1 – Certifications
FCC: 2AB8I-RR4
NTEP: 20-012
2.2 – Wireless
2.3 – Dual Meter+™
2.4 – Configuration Methods
2.5 – Battery
*Note: 10-year average battery life calculated and tested at typical
operating temperatures between 70ºF-90ºF. Battery life may be
reduced when operated outside of this range.
2.6 – Dimensions:
2.7 – Operation Environment:

3| Meter Compatibility

The NextCentury Remote Reader integrates Dual Meter+™
technology, allowing for compatibility with virtually all modern
meter outputs.
3.1 – Pulse Output Meters
3.2 – Encoded Output Meters
sales@nextcenturymeters.com
www.nextcenturymeters.com
IC: 20949-RR4
IP-Rating: Tested to IP65
NextCentury two-way Communications Radio
902-928 MHz Unlicensed Band
Any combination of two encoded or pulse-output
meters
Pulse output configuration capable
A Cloud-connected GW301 Gateway or a DC301
Direct Connect device (sold separately) is required to
change the RR4-TR configuration.
Pre-programming available.
Preinstalled, field replaceable ER18505
Up to *10-year battery life
Display unit and mounting plate: 5.7" x 4.6" x 1.7"
(145mm x 117mm x 44mm)
Mounting holes center-to-center: 3.5" (88.4 mm)
Compatible with a standard single gang wall-box
-20°C to 60°C (-4°F to 140°F )
Should be installed in an indoor, dry environment
Outdoor Ratings: (coming soon)
Passive pulse sensing (including reed switch, solid-
state relay, contact relay, open-drain types)
Active voltage sensing (max. 16 VDC)
Neptune (Including ProRead, ECoder, and ProCoder
register models)
Sensus UI-1203 (Includes most meter models from
Sensus, Hersey, Mueller, Master Meter, Badger,
Kamstrup, Elster, Metron-Farnier, and Zenner)
Elster/AMCO K-Frame (Includes most meter models
from Elster, AMCO, ABB and Kent)
V. 091520

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RR4-TR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NextCentury RR4-TR

  • Page 1 ● Active voltage sensing (max. 16 VDC) In addition to displaying the meter read, the RR4-TR Remote 3.2 – Encoded Output Meters Reader operates as a wireless transceiver end-point to transmit ●...
  • Page 2 6.1 – Cloud Configuration DO NOT open the Remote Reader unless replacement of the Performed using the NextCentury Website or Mobile ● battery is necessary (approx. every 10 years). It is not necessary to disassemble/open a Remote Reader during installation.
  • Page 3 May also be used for advanced troubleshooting and ● diagnostics. 8.2 – Meter Display Views The RR4-TR will rotate through the following views at a 5-10 second interval (as applicable to its configuration). 7| Setting the Configuration • Meter read, utility, unit of measure Meter 1 •...
  • Page 4 8| LCD Display (Cont.) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set 8.6 – Utility Types forth for an uncontrolled environment. This equipment should The configured utility type is shown on the bottom left of the be installed and operated with minimum distance 20cm between display.
  • Page 5 Cet équipement doit être installé et utilisé avec un Distance minimale de 20 cm entre le radiateur et votre corps. 12| Contact Information For any questions or concerns, please contact NextCentury Submetering Solutions Product Support: • Phone: (844) 538.8203 •...

Table of Contents