Front And Top Panel - DStv 6S Quick Start Manual

2
1
1. Reset button
2. DStv HD
3. P- button
P+ button
4. Red, Amber, Green LEDS
5. Model 6S
3

Front and Top Panel

3
4
Press once to switch the decoder in and out of standby
Press and hold for a few seconds to reset (reboot) the
decoder
This is the name of the decoder
Goes to the previous channel
Goes to the next channel
This LED is used to indicate various states that the
decoder may be in;
Flashing AMBER = unread mail message
GREEN blink = the decoder has received a command from
the remote
Solid RED = the decoder is on standby mode
Solid AMBER = the decoder is downloading software
Solid GREEN = the decoder is tuned to an audio or video
channel
Flashing RED = error
This is the model number. Please remember to give us this
information when calling us with any technical queries
5
DStv HD Decoder Quick Start Guide