Installing Transceivers Into The Transceiver Ports; Connecting To Power - D-Link DGS-3000-28SC Quick Installation Manual

Installing Transceivers into the Transceiver Ports

The Switch is equipped with Small Form-factor Pluggable (SFP) and Small Form-factor Pluggable plus
(SFP+) ports, which supply connecting SFP, WDM SFP and SFP+ transceivers.

Connecting to Power

Power On (AC Power)
Plug one end of the AC power cord into the power socket of the Switch and the other end into the local
power source outlet.
Power Failure (AC Power)
For AC power supply units, as a precaution, in the event of a power failure, unplug the Switch. When
power has resumed, plug the Switch back in.
Installing the Power Cord Clip
А) With the rough side facing down, insert the Tie Wrap into the hole below the power socket.
4