Table of Contents
Advertisement
Clean the opening with a soft,
8.
damp cloth.
Push the insert in horizontally until
9.
the tab clicks into place.
Close the base unit → Page 37.
10.
Closing the base unit
Requirement: The base unit is open.
→ "Opening the base unit", Page 35
Insert the heat exchanger cover by
1.
the handle.
Cleaning and servicing en
Close the lever for the heat ex-
2.
changer.
Close the maintenance flap.
3.
15.3 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
Do not use hard or rough objects,
▶
abrasive cleaning products or steel
wool for cleaning.
37
Advertisement
Table of Contents
