Sony BRAVIA KLV-40R252F Operating Instructions

4-736-036-01(1) Checking the
accessories
Table-Top Stand (1)*
Fixing screws for Table-Top Stand (M4 × 20) (4)
Remote control (1)
AC power cord (mains lead) (1)
Television
AC adapter (1)
Size AAA batteries (2)
Operating Instructions (this manual) and other
Operating Instructions
documents
* Refer to the supplied Setup Guide to assemble the Table-
Top Stand.
1: Attaching the Table-
Top Stand
• If using an electric screwdriver, set the tightening torque at
approximately 1.2 N·m (12 kgf·cm).
Thick and
soft cloth
Customer support
@
http://www.sony.co.in/
(TEL: 1800-103-7799)
© 2018 Sony Visual Products Inc. Printed in India
KLV-40R252F / 32R202F
2
4: Preventing the TV Overview of the
from toppling over TV controls and
indicators
Follow the instructions on the screen.
8 mm - 12 mm
~ Front View
• You can also tune channels manually.
32R202F: M4 screw
• Language options vary depending on model.
40R252F: M6 screw
• Select "Home" from "Location" for the best TV settings to
(not supplied)
use the TV in the home.
3
To select TV position:
"Settings"
"Set-up" Power/Standby indicator
• Lights off when in standby.
• Lights up in green when
Cord "AV Set-up"
1.5 N·m/1,5 N·m
the TV is turned on.
(not supplied)
{15 kgf·cm}
• Flashes while the remote is
"TV Position"
being operated.
~
Screw
~
• To exit "Set-up" menu:
(not supplied)
• Do not put anything over the sensor, doing so may affect
its function.
Back View
5: Performing the
initial setup
1
Power
Turns the TV on or
switch to standby
mode.
~
CH/INPUT
• When the TV is in standby mode (the "/1 (standby)
• Press button until
indicator on the TV front panel is off ), press "/1 on the
"Rr Programme +/-"
remote to turn on the TV.
appears and selects
• Make sure that the TV is completely turned off before
channels with Volume
unplugging the AC power cord (mains lead) or DC
button.
cable. Unplugging the AC power cord (mains lead) or
• Press button until "Rr
DC cable while the TV is turned on may cause the TV to
Input select" appears
malfunction.
and selects input
source with Volume
button.
2: Mounting the TV on
Detaching the Table-Top Stand
from the TV
the wall
~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV. This TV's instruction manual only provides the steps to
prepare the TV for Wall-Mount installation before it is
Thick and soft cloth installed on the wall.
To Customers:
For product protection and safety reasons, Sony
strongly recommends that installation of your TV be
performed by Sony dealers or licensed contractors. Do
not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation,
periodic maintenance and examination of this product.
Suffi cient expertise is required for installing this
product, especially to determine the strength of
the wall for withstanding the TV's weight. Be sure
to entrust the attachment of this product to the wall
to Sony dealers or licensed contractors and pay
adequate attention to safety during the installation.
Sony is not liable for any damage or injury caused by
mishandling or improper installation.
Use the Wall-Mount Bracket SU-WL450 (not supplied) to
install the TV to the wall.
When installing the Wall-Mount Bracket, also refer to the
Operating Instructions and Installation Guide supplied
with the Wall-Mount Bracket.
~
• Be sure to store the removed screws in a safe place,
keeping them away from children.
• Place the TV with its screen facing down on a level and
stable surface covered with a thick and soft cloth when
securing the Mounting Hook or when removing the Table-
Top Stand from the TV to prevent damaging the surface of
the LCD display.
Precautions
• Detach the Table-Top Stand from the TV. For details, refer
to (Detaching the Table-Top Stand from the TV).
Wall mount location
B
A
Model Name KLV- A (mm) B (mm)
40R252F 300 200
32R202F 100 100
Overview of the remote control
Selects input source.
Switches to a TV display when
displaying external input.
In TV mode: Selects channels.
Available when operation guide
appears on the screen.
Sets the desired time frame to turn
off TV automatically.
Returns to the previous screen.
In USB mode: Stops the playback.
Displays or cancels the menu.
Adjusts volume.
Mutes or restores sound.
Volume
• Adjusts volume.
• Moves through
options up or down
when selecting
channels or input
x To change the Wide Mode
source.
For TV, Video, Component or HDMI (except PC input)
Wide Zoom* Normal Full Zoom*
* Parts of the top and bottom of the picture may be cut off.
~
• Some options may not be available depending on the signal source.
To detach the Table-Top Stand from the TV Standard mounting
32R202F:
Screw (+PSW 4 x 20)
with Bush
40R252F:
32R202F:
Screw (+PSW 6 x 20)
Screw (+PSW 4 x 50)
Pulley
40R252F:
Screw (+PSW 6 x 50)
32R202F: Bush (M4)
1 Make sure that the wall has enough space for the TV
40R252F: NO need
Spacer (60 mm)
and is capable of supporting a weight of at least four
times that of the TV. Refer to the following table on
installing the TV to the wall. See Operating Instructions
Specifi cations for TV's weight.
Belt
3
Connect necessary cables to the TV.
80
~
• You cannot access to any terminal after installing the TV
to the wall.
4 Install the TV to the Base. Refer to "5" of Installation
Standard Slim Guide and "Installing the TV to the Wall" of Operating
Screen centre point
Instructions supplied with the Wall-Mount Bracket.
mounting mounting
a
Unit: mm b
c
Screen d
Display
centre Length for mounting
dimensions
Model dimension
Name
KLV-
Standard Slim
mounting mounting
40R252F 916 542 56 334 134 93
32R202F 730 437 117 344 134 93
~
• Figures in the table may differ slightly depending on the Model Name KLV- Hook location
installation.
40R252F b
• When your TV is installed on the wall, the upper side of the
TV slightly leans forward. 32R202F d
2 Attach the Attachment parts for Wall-Mount Bracket.
Check the Attachment parts by referring to "1" of the
Wall-Mount Bracket Installation Guide.
Refer to the instructions supplied with the Wall-Mount
~
Bracket for your model to install the TV on the wall.
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future
use. Retain this manual for future reference.
Introduction Trademark information
Thank you for choosing this Sony product. Before operating the TV, • The terms HDMI and HDMI High-Defi nition Multimedia Interface, and
please read this manual thoroughly and retain it for future reference. the HDMI Logo are trademarks or registered trademarks of HDMI
~ Licensing Administrator, Inc. in the United States and other countries.
• • Manufactured under license from Dolby Laboratories. Dolby,
Images and illustrations used in Setup Guide and this manual are for
reference only and may differ from actual product. Dolby Audio, and the double-D symbol are trademarks of Dolby
Turns the TV on or switch to standby
• The illustrations of the remote control used in this manual are of the Laboratories.
mode. • "BRAVIA" and
RMT-TX112P unless otherwise stated.
• • Blu-ray Disc is a trademark.
Before operating the TV, please read Safety Information. Retain this
manual for future reference.
Selects the language.
Location of the Setup Guide
Setup Guide is placed on top of the cushion inside the TV carton.
Location of the identifi cation label
Dual Sound.
Labels for TV Model No. and Power Supply rating are located on the
rear of the TV.
Labels for the AC adapter Model No. and Serial No. are located on the
bottom of the AC adapter.
Disposal of the TV set
Selects the desired wide mode.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Union and other countries with separate
collection systems)
Displays information about the
programme/input.
This product is qualifi ed for the BEE Star rating in the 'Home' Mode.
Disposal of the TV set
The Objectives of Star Labeling Program is designed to promote
Selects, adjusts or confi rmed Disposal of Old Electrical & Electronic
energy effi cient products and practices.
selected items. Equipment (Applicable in Republic of When the television is initially set up, it is designed to meet the BEE
Star Labeling requirements while maintaining optimum picture quality.
India)
• Changes to certain functionalities of this television (TV Guide,
Displays a list of shortcuts to some
Picture/sound etc) may change the power consumption.
• Depending upon such changed setting (eg., Retail mode), the
setting menus.
power consumption may vary which possibly could exceed the
This symbol and its variations indicate that this product and its
stated energy consumption.
Returns to the previous channel or components, consumables, parts or spares thereof shall not be treated
To reset the television to Star rating qualifi ed settings, select 'Home'
as household waste and may not be dropped in garbage bins. Product
input watched (for more than 15 mode from the initial set-up procedure in 'factory settings' under the
owners are advised to deposit their product at the nearest collection
seconds). 'Set-up' menu.
point for the recycling of electrical and electronic equipment. Your
co-operation shall facilitate proper disposal and help prevent potential
In TV mode: Selects the next or * Attention statement is subject matter of BEE, and
negative consequences/hazards to the environment and human health,
previous channel. applicable if functions is available
which could otherwise be caused by inappropriate waste disposal
** "Home mode" conditions are as per BEE guideline only
including improper handling, accidental breakage, damage and/ or
improper recycling of e-waste. The recycling of materials will help
to conserve natural resources. For more detailed information about
recycling of this product, please contact your local civic offi ce, your
Operates USB compatible
household waste disposal service provider or the store where you made
equipment that is connected to
the purchase. You may contact our company's toll free number in India
for assistance.
the TV.
Toll Free: 1800-103-7799
Visit: www.sony.co.in for product recycling
Reduction in the Use of Hazardous Substances in Electrical &
Electronic Equipment (Applicable in Republic of India)
This product and its components, consumables, parts or spares
comply with the hazardous substances restriction of India's E-Waste
(Management) Rules. The maximum allowable concentrations
of the restricted substances are 0.1% by weight in homogenous
For PC or HDMI PC Input (PC timing) materials for Lead, Mercury, Hexavalent Chromium, Polybrominated
Biphenyls (PBB) and Polybrominated Diphenyl Ethers (PBDE), and
Normal Full 1 Full 2
0.01% by weight in homogenous materials for Cadmium, except for
the exemptions specifi ed in Schedule II of the aforesaid Rules.
3: Connections
Picture Quality
• AV composite cable • Component cable • HDMI cable
• Antenna (aerial) cable
SD HD
Standard defi nition (SD) videos have High defi nition (HD) videos have picture
picture signals with a vertical resolution of signals with a vertical resolution of 720 or
480 (NTSC) or 576 (PAL/SECAM) lines. 1,080 lines.
If Cable, Connectivity, and other External Devices are defective or not done correctly, it may cause TV
showing symptoms below;
TV Auto OFF/ON @ TV No Audio @ TV No Picture
Cables Condition
Make sure the cables at A, B, and C are in good condition and not defective
Cables Connectivity
Make sure the cables and connectors at A, B, and C are inserted and connected correctly
Set Top Box (STB)
Make sure the STB is working fi ne and no issue from the Service Provider
Viewing pictures from the connected
equipment
are trademarks of Sony Corporation. Turn on the connected equipment, then press on the remote control or CH/INPUT on the TV to display the
connected equipment list.
Rear View
ATTENTION:
A HDMI IN 1 and HDMI IN 2 (Home Theatre systems, Camcorder, Blu-ray Disc player, DVD player, PC with
HDMI output).
Connect to the HDMI IN jack if the equipment has an HDMI jack.
~
• The HDMI jacks can support PC timing in HDMI PC mode. Refer to (PC input signal reference chart for HDMI IN 1, 2) next
to "PC settings".
• Be sure to use only an authorized HDMI cable bearing the HDMI logo.
B
(Digital still camera, Camcorder, USB storage media)
Access photo/music/video fi les stored on a USB device.
C AUDIO OUT / (Stereo systems, Headphone)
Connect with an audio cable or headphones. You can listen to TV sound through your stereo system or headphones.
You can select "Variable" or "Fixed" in the "Audio Out" menu.
D
AC IN 110 V – 240 V AC, 50/60 Hz
Connect AC adapter to the ( ) jack.
~
• Be sure to fi x adapter plug in hook.
E VIDEO IN /COMPONENT IN/AUDIO (DVD player, VCR, Video game equipment, S VHS/Hi8/DVC
camcorder, DVD player with component output)
Connect to the VIDEO IN jack and the AUDIO jacks. If you connect mono equipment, connect to the L
(MONO) jack.
For better picture quality, component connection is recommended if your DVD player has a component video
output. Connect to the COMPONENT IN jacks.
F PC IN
G
PC / HDMI AUDIO IN
Connect to the PC / HDMI AUDIO IN. It is recommended to use an audio input (stereo minijack).
Connecting an antenna (aerial)/ Connecting audio/video devices/
cable Set top box
Antenna (aerial) cable (not supplied)
Connecting an antenna (aerial)/
cable and VCR
PC Cable
(not supplied)
PC
B C
AV cable
(not
supplied)
Antenna (aerial) cable
(not supplied)
AV cable
(not supplied)
VCR
Antenna
(aerial) A
cable (not
supplied)
DVD recorder/Set top box
Using Menu x To watch a channel or external input
Favourites
Functions
TV 9
Add Delete
Select Confi rm Exit
1 Favourites
Photo Frame Mode
2 Applications
FM Radio
3 Media Photo
Music
4
Settings Video
EXIT ~
• To exit Favourites List:
• When you run the "Auto Tuning", only the programme
channels in your Favourites list will be cleared.
2 Applications
Photo Frame Mode
• To exit Home menu:
Display Photo, Music and Clock calendar at the same
time.
• To navigate menu:
x To enter Photo Frame Mode
• To enter:
"Applications"
"Photo Frame Mode"
1 Favourites
~
• To exit Photo Frame mode: /
Store up to 18 channels or external inputs.
x To add a current channel or external inputs x To select Photo/ x To select Display
into Favourites list Music Mode
1 2 In Photo Frame Mode In Photo Frame Mode
OR
"Favourites"
"Add to Favourites"
red
"Image "Display Mode"
Selection"/ "Music
Selection"
~
• You are also able to select Photo/Music/Display Mode
from t "Settings" t "Set-up" t "Photo Frame
Settings".