Guidelines for Remote Control
• Point your remote control directly at the
IR sensor located on your TV.
• Make sure that no objects are blocking
the path between the remote control and
the IR sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the
• If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
Before setting up
Some TV models are packaged with a
detached Table-Top Stand so you can
mount your TV to a wall right away. See
page 20 (Using a Wall-Mount Bracket) if you
want to mount the TV to a wall. If you are not
mounting the TV to a wall, you will need to
attach the Table-Top Stand. You will need a
Phillips screwdriver (not supplied) and the
supplied screws to complete the task. Look
for the supplied Table-Top Stand instruction
Be sure to consider the following while
setting up your TV:
• Disconnect all cables when carrying the
• Carry the TV with the adequate number
of people; larger size TVs require two or
• Correct hand placement while carrying
the TV is very important for safety and to
• Ensure your TV has adequate ventilation,
see page 21.
• For best picture quality, do not expose
the screen to direct illumination or
• Avoid installing the TV in a room with
reflective wall and floor materials.
• Avoid moving the TV from a cold area to
a warm area. Sudden room temperature
changes may cause moisture
condensation. This may cause the TV to
show poor picture and/or poor color.
Should this occur, allow moisture to
evaporate completely before powering
the TV on.